Post by Steve King (Admin) on Nov 22, 2008 21:24:46 GMT -6
For carrying, you have 4 options:
1) Get a piece of rope and take a U-Nail and hammer it on each side of the rope to affix it to the outside of the washer box. Here's a pic:
2) Option 2 woule be to drill 2 hole through one side of each washer box and have the rope go from the outside in through each hole, then tie a knot on the inside of the hole larger than than the hole.
3) Option 3 woult be to affix a simple drawer handle to one side of one or both boxes in place of where the rope would go. However, I prefer the rope method. Here's a pic:
4) Option 4 would be to buy a custom made carry case from www.WasherCases.com There are many colors to choose from.
As for connecting the 2 boxes together (square or octagonal washer type boxes that is), you could also go with #4 above for a carry bag or you could get some latches for 2 opposite sides of the boxes to hold them together for carrying. Here's a pic: